Step 1
Empty box and pop out the extraction tube holder.
Step 2
Break the tip of the single use vial with the extraction buffer.
Step 3
Pour all the extraction buffer inside into the extraction tube.
Step 4
Remove the swab from pouch. Do not touch swab tip.
Step 5
Gently insert the swab up to 1-2 centimetres into the nostril. Roll the swab around the inside wall of both nostril at least 4 times.  Note: False negatives may occur if the nasal swab is not properly collected.
Step 6
Insert the swab into the extraction tube and swirl the swab about 5 times while submerged to mix the sample vigorously in the buffer.
Step 7
Squeeze out as much liquid as possible from the swab by pinching the side of the flexible extraction tube. Press the cap tightly onto the extraction tube.
Step 8
Remove test cassette from foil pouch and place the test cassette on a flat surface. Apply 4 drops of extracted sample to the sample well of the test cassette. Dispense the sample at 90 degree to allow for free falling drops and avoid bubbles.
Step 9
After 15 minutes of development time, illuminate the result window with a UV flashlight to observe the test result.
Step 10
Dispose of used swab and cassette in the trash. Ensure you wash your hand thoroughly.